Cool Bed III cooling mat for dogs, blue
Your pet will now be comfortable and cool everywhere!
This cooling dog bed will be the perfect accessory during those hot summer days. No electricity is required to operate this bed: just add water and air ! The nylon/vinyl exterior is also tougher than ever.
For indoor and outdoor use.
Guides & Resources
- Small : 24" x 17" x 1,5"
- Medium : 32" x 22" x 1,5"
- Large : 44" x 32" x 1,5"
Two years limited warranty.
Place the Cool Bed III™ with the cap side of the bed up for filling and begin carefully filling the Cool Bed III™ with cool water (Small : 1 - 1,5 gallons / Medium : 2 - 3 gallons / Large : 4 - 6 gallons).
Close the filler cap, pull open the air adjustment valve and gently work as much air out as you can, using sweeping motions. Seal the valve when most of the air has been removed. The bed should feel very soft and spongy and you should feel water squishing around inside the bed.
To empty it, open the filler cap and roll bed from opposite end, expelling water out of the cap (much like rolling a sleeping bag). Store with filler cap open.
The surface can be cleaned using a damp towel or sponge and mild dish washing detergent. DO NOT wash in a washing machine. Grapefruit seed extract is an all natural, non-toxic antibacterial. Add it to the water when filling and place a few drops in before storing to help prevent bacterial growth.
The best results will be obtained when used in a shady area as direct sun will warm the Cool Bed III™. The Cool Bed III™ should be placed out of the way of foot traffic, on a smooth surface that cannot cause punctures, abrasions or leakage.
Have your dog’s nails routinely trimmed to prevent accidental punctures.
Never allow the Cool Bed III™ to freeze.
The Cool Bed III™ is not intended to be a life saving device.
This product is to be used in temperatures under 95° Fahrenheit.
- SKU 1027477
- Weight 1.130 KG
- Packaging Height 48.300 CM
- Packaging Width 5.100 CM
- Packaging Length 61.000 CM
- Manufacturing Country China